There was no edition last week for want of an internet connection. This week we're late, as it started with yours truly catching the last 8 minutes of the Super Bowl in the Sydney airport.
Both of our armor selections this week are 21st Century items from the sale at the Monkey Depot. The first is for those of you who like big models. Offered for just $19.95, it's a 1/18 scale US M48A3 Patton Main Battle Tank (Vietnam Era).
Light the lava lamp, crank up the Doors and click here:
http://www.monkeydepot.com/21st_Cent..._p/usx0088.htm
Selection #2 is an early World War II tank that is rarely done. This is a 1/32 scale German Panzer 38(t) Light Tank - "Red 525", offered for just $7.99.
Get it here:
http://www.monkeydepot.com/product_p/us0113.htm
Both of our aircraft selections are from World War II and in the 1:72 scale. The first is a sale item from the Flying Mule for just $9.99.
Dragon 1:72 Warbirds 50192
F4F Wildcat Diecast Model
USN VC-93, "White 29", Hatherly Foster III, USS Petrof Bay, April 1945, (FM-2)
1:72 Scale
Length 4.75"
Width 6.25"
This fully finished and pre-painted model represents "White 29" from VC-93. It was flown by Lt. Hatherly Foster III, while based aboard the USS Petrof Bay (CVE-80) in April 1945.
The Grumman F4F Wildcat was the standard carrier-based fighter of the United States Navy for the first year and a half of World War II. An improved version built by General Motors (the General Motors FM Wildcat) remained in service throughout the war, on escort carriers where newer, larger and heavier fighters could not be used.
The Wildcat was outperformed by the Mitsubishi Zero, its major opponent in the Pacific war, but held its own by absorbing far more damage and wielding more firepower. With heavy armor and self-sealing fuel tanks, the Grumman airframe could survive far more than its lightweight, unarmored Japanese rival.
The original Grumman F4F-1 design was a biplane, which when proving inferior to rival designs was recast as the monoplane F4F-2. This was still not competitive with the Brewster F2A Buffalo which won initial US Navy orders, but when the F4F was fitted with a more powerful engine, the Pratt & Whitney Twin Wasp, it showed its true merits and became the F4F-3. US Navy orders followed as did some (with Wright Cyclone engines) from France; these ended up with the Royal Navy's Fleet Air Arm after the fall of France. In British service initially these were known as the Martlet I, but not all Marlets would be to the exact same specifications as US Navy aircraft. The F4F-3A would enter service as the Marlet III(B), the FM-1 as the Marlet V, and the FM-2 as the Martlet VI. The name Wildcat was still commonly used for these aircraft in spite of the official name change.
A new version, the F4F-4, entered service in 1942 with six guns and folding wings, allowing more to be crammed on a carrier; this was the definitive version and the one that saw the most combat service in the early war years including the Battle of Midway.
Grumman production ceased in early 1943 to make way for the newer F6F Hellcat, but General Motors continued producing them for both US Navy and Fleet Air Arm use, as larger fighters such as the Hellcat and the Vought F4U Corsair were too large for use on escort carriers. At first they produced the identical FM-1 model but then switched to the improved FM-2 (based on Grumman's F4F-8 prototype) with a more powerful engine and a taller tail to cope with the torque. In all, 7,251 Wildcats were built. All versions of the Wildcat used hand-cranked landing gear with a relatively narrow track, making landing accidents where the landing gear were not fully locked into place distressingly common.
Dragon 1:72 Warbirds
The Dragon Models "Dragon Wings 1:72 Warbirds Series" presents highly-detailed, ready-made diecast models of military aircaft.
Dragon Models "Dragon Wings 1:72 Warbirds Series" diecast airplanes feature:
- Diecast metal construction with some plastic components.
- Realistic panel lines, antennas, access panels and surface details.
- Pad printed markings and placards that won't fade or peel like decals.
- Opening canopies, revealing detailed cockpit interiors.
- Selected movable control surfaces.
- Optional extended/retracted landing gear.
- Presentation stand to display the aircraft "in flight".
- Authentic detachable ordnance loads complete with placards.
- Accurately detailed underside with concealed screwheads.
Grumman F4F Wildcat-Designed to meet a 1936 US Navy requirement for a new carrier-based fighter, the F-4F was first flown on September 2nd, 1937.
Point your nose into the wind and click here:
http://www.flyingmule.com/products/DM-50192
Our final selection is the Corgi 1:72 scale FW190A Adolf Dickfield- Black Double Chevron from Corgi by way of the Toy Headquarters for $19.99.
The FW 190 was a late arrival in North Africa, making its combat debut on November 16, 1942.
Over the next six months, III./ZG 2, III./SKG 10, II./JG 2, the Stab and II./SchG 2, all successfully flew the FW 190 in North Africa, with many victories. This particular FW 190 was written off when its pilot, Adolph Dickfield, hit an obstacle and somersaulted during takeoff from Kairouan on January 8, 1943. The bulk of Dickfield`s 136 victories were scored on the Eastern Front, but 11 of his 21 Western and Tunisian kills were four-engined bombers.
- 1/72 Scale
- Diecast Metal
- Aviation Archives
- Wingspan 6 inches
Click here before the Allies take Tunisia:
http://www.jjshobby.com/Shoppingcart...0fc121b7d55a7b